Call The 24/7 Plumber at (470) 305-7006 | LIC # MP006430

24 Hour Hot Water Heater Service in Buckhead Atlanta, Georgia

Slab Leak Repair Atlanta
Free Estimate

Looking for 24 Hour Hot Water Heater Service in Fulton County, GA? Ridgeway Plumbing provides fast plumbing repairs to the Atlanta area 24/7. Quality work, upfront pricing, and a 100% Satisfaction Guarantee is our code of honor.

Free Estimate

Atlanta residents who find themselves looking for 24 Hour Hot Water Heater Service in Atlanta, GA may come to realize that there’s no shortage of 24 Hour Hot Water Heater Service in Buckhead, Georgia. Nevertheless, when you have a plumbing emergency more often than not it is difficult to find an Atlanta plumbing company you can count on! When you find yourself in this situation your best bet is to reach out to Ridgeway Plumbing Atlanta at (678) 318-3505 for same day service. For over three decades The  staff at RidgewayPlumbingAtlanta.Com has served the best interests of families throughout Fulton County, earning them a reputation as one of the most reliable companies for 24 Hour Hot Water Heater Service in Buckhead.

With all of that said, do you know what is considered a plumbing emergency? When is it necessary to seek help with a plumbing emergency and when could it wait? Although a garbage disposal which is out of service or perhaps a broken dishwasher may be inconvenient, it’s most likely not worth the extra money to call in a plumber after closing time or on a holiday to handle them. Still, there are some occasions that it’s essential to hire a trained plumber. These cases are called emergency plumbing circumstances. Below are some cases of emergency plumbing situations.

  1. Blocked Drain – See if you could unclog the drain first, if you are not able to, the blockage could result in water accumulating in other sections of the home and cause flooding. Professional plumbing help is fundamental to resolve the matter. This could save you some money.
  2. Water Leak – It is always an unexpected situation each time water is leaking. One main reason for water damage is a leaking pipe. You should switch off the water supply to your house and contact a plumber immediately. To stop permanent damage by water seeping into the floor, the leak has to be attended to without delay.
  3. Blocked Toilet – If you can’t unclog the toilet on your own, ensure that you turn off the water supply, keep the lid closed and the house members notified of the risk involved. Unclog your toilet by calling a plumber right away and stop a nasty problem if it overflows.
  4. Frozen Pipes – Frozen water pipes would prevent you from getting water. They are able to also result in damages to the pipe pipe. Hiring a plumber to handle it is the best solution.
  5. Clogged Sewer Line – If there is a foul smell coming from the vicinity of your sewer, then you could possibly have this concern. Eventually it is going to impede your usage of showers, toilet or sinks up until the sewer line is restored. Contact a plumber right away.
  6. Busted Water Heater – To mend, your heater you will have to shut off the water source and call a plumber straight away.

Although it is a real concern to be worried about the extra expenses incurred in plumbing emergency services, water damage could cost a lot more to correct compared to developing a professional plumber attend to the problem. Restore your plumbing troubles professionally and quickly and prevent further water damage and mold by making use of professional plumbers.

By now you may have discovered not all contractors providing 24 Hour Hot Water Heater Service in Atlanta, GA should be taken into consideration. But if you or your family find themselves in need of an emergency plumbing company in Buckhead you know you can rely on AtlantaWaterLines.Com to help you. If you would like to learn more about Hydro Jetting near Buckhead, Georgia take a look at our blog.

Recent Article Related to 24 Hour Emergency Plumber Near Me

How to Replace the Water Line on Your Ice-Maker

Plumbing Company Atlanta

Appliance companies tend to sell new ice-makers, washing machines, and other appliances with low-quality water lines and valves. You won’t believe how often we here at Ridgeway Mechanical receive calls from clients with flooded kitchens as the result of these inferior materials. What’s a person to do? You need a washing machine and you need an ice maker. We recommend that you replace the inferior plastic water lines with braided steel supply lines.

Replacing your ice-maker water line with a braided steel supply line and installing a quality copper tee fitting and high-quality shut-off takes only half an hour, and you probably won’t have to worry about leaks again. Braided steel is non-kinking and highly durable, especially when compared to 1/4-inch flexible copper or – worse – plastic.

You can either call Ridgeway Mechanical to do it for you, or you can do it for yourself, using the instructions below. We recommend that you only tackle this task if you’re an experienced DIY expert.

Here’s what you’ll need:

Materials

  • a braided steel water line
  • copper solder
  • copper flux
  • copper repair couplings
  • copper tee fitting
  • copper shutoff valve

Tools

  • a wrench set
  • a pipe cutter
  • a soldering torch

Be sure that you have everything handy before you start.

Replace Your Ice-Maker Supply Line in 5 Simple Steps

Step 1: Turn off the main water supply

Locate your home’s main water supply and turn it off. Now drain the system by opening all the faucets.

Step 2: Remove Saddle Valve

After removing the saddle valve, but the copper underneath it. Depending on how long the water line is, you may need to cut out more in order to create room for additional copper and a repair coupling.

Step 3: Prepare the Fittings & Shutoff Valve

The new shutoff will have a packing nut which you should unscrew. Also remove the core and the handle before you solder it. Jiggle the pipes to remove all the water.

Now clean the copper fittings, before fluxing and assembling them before soldering the joints.

Let the pipe cool for about 10 minutes before reattaching the shutoff handle again.

Step 4: Tighten Water Line to the Shut-Off

Insert the braided steel water line to the compression fitting on the shutoff. You can hand-tighten the water line, but give it a good half-turn with a wrench too.

You can now turn the main water supply back on. Take this opportunity to check for leaks. Allow water to run through the new braided pipe into a bucket for a couple of minutes to remove any solder bits or corrosion.

Step 5: Attach the Water Line to the Fridge

Secure the water line to the water inlet valve at the back of your refrigerator from which you removed the plastic pipe.

That’s it – you have just enhanced the durability of your ice maker by several years. Now you don’t have to worry about a flooded kitchen, and you can rest assured that your ice-maker will function as intended.

Our master plumber warns against using the wrong tools or materials to do this job. Appliances are costly, and the wrong materials can cause damage. We recommend that, unless you have the right materials and plumbing and DIY experience, you rather call Ridgeway Plumbing Atlanta to replace your ice-maker supply line.

Searches Related to Drain Cleaning Service in Buckhead, GA

Plumbing Contractor Atlanta

24 Hour Hot Water Heater Service Buckhead Atlanta, GA

24 Hour Hot Water Heater Service in Buckhead, Georgia Looking for 24 Hour Hot Water Heater Service in Fulton County, Georgia? Whether you are looking for Tankless Water Heaters Near Me or Water Heater Repair Atlanta GA call (470) 305-7006 the #1 Fulton County plumber with the best reviews and lowest cost! [...]

2019-06-16T07:08:04+00:00