Call The 24/7 Plumber at (470) 305-7006 | LIC # MP006430

Faucet Installation in Buckhead Atlanta, Georgia

Sump Pump Repair Atlanta
Free Estimate

Looking for Faucet Installation in Buckhead, Georgia? Ridgeway Plumbing provides fast plumbing repairs to the Atlanta area 24/7. Quality work, upfront pricing, and a 100% Satisfaction Guarantee is our code of honor.

Free Estimate

If you find yourself searching for Faucet Installation in Atlanta, GA may come to realize that there’s no scarcity of Faucet Installation in Buckhead, GA. With that said, when you have a plumbing emergency it is always difficult to find a plumbing contractor in Atlanta you can depend on! When you find yourself in this situation your best bet is to reach out to Alan at Ridgeway Plumbing at (678) 318-3505 for same day service. For almost forward day case The  staff at Ridgeway Plumbing Atlanta has served the best interests of homeowners and renters alike throughout Fulton County, earning them a reputation as one of the most reliable companies for Faucet Installation in the Metro Atlanta Area.

With all of that said, do you know exactly what is a plumbing emergency? What time is it necessary to call for assistance with a plumbing problem and when should it wait? While a garbage disposal that’s not function or a broken dishwasher might be inopportune, it’s most likely not worth the high cost to get a plumber after business hours or on a holiday to resolve them. But, there’re those times when it is essential to hire a trained plumber. These cases are designated as emergency plumbing circumstances. Following are some cases of emergency plumbing situations.

  1. Clogged Drain – Try to unblock the drain first, if you are not able to, the blockage could result in water accumulating in other sections of the house and cause flooding. Expert plumbing help is imperative to solve the trouble. This could save you lots of money.
  2. Water Leak – This is always an urgent situation whenever water is leaking. One major reason for water damage is a leaking pipe. You must switch off the water supply to your house and get a plumber right away. In order to avoid irreversible damage by water seeping into the floor, the drip needs to be attended to without delay.
  3. Backed up Toilet – If you aren’t able to unclog the toilet by yourself, ensure that you turn off the water supply, keep the lid closed and the house members notified of the risk involved. Unblock your toilet by hiring a plumber immediately and avoid a nasty problem if it overflows.
  4. Frozen Pipes – Frozen water pipes can prevent you from having any water. They could also cause damages to the pipe pipe. Hiring a plumber to handle it is the best solution.
  5. Backed Up Sewer Line – If there is a bad odor coming from the vicinity of your sewer, then you could possibly have this concern. Eventually it would impede your using showers, toilet or sinks till the sewer line is restored. Get a plumber right away.
  6. Leaking Water Heater – To correct, this you’ll need to shut off the water supply and call in a plumber immediately.

Although it’s a real concern to be worried about an added money spent in plumbing emergency services, water damage may cost more to repair in comparison to possessing a professional plumber deal with the issue. Reinstate your plumbing issues professionally and quickly and avert further water damage by making use of professional plumbers.

As you can see not all contractors providing Faucet Installation in Atlanta, GA are the same. But if if anyone you know finds themselves in need of an emergency plumbing company in the Metro Atlanta area you know you can rely on AtlantaWaterLines.Com to help you. If you would like to learn more about Qualified Plumber in Buckhead, GA check out at our blog.

New Blog Post Related to Garbage Disposal Repair in Buckhead, Georgia

How to Replace PEX Piping

Plumbing Atlanta

PEX water pipes are durable and easy to install, repair or replace, when the time comes to do that. When your water supply lines spring a leak, you can easily repair it, using our instructions below, to save money. These instructions apply to PEX water pipes, as others may require different processes, so be sure to identify the type of pipe before you continue with the repairs. You don’t want to try bend copper or PVC supply lines.

How Do I Know It is PEX Piping?

There are three identifying features to PEX piping:

  1. It is easy to identify PEX pipes by the information printed on the side. The information will include the size of the pipe, and it will say “PEX” on there, too.
  2. PEX piping is available in solid red or solid white. White is for cold water, and red is for hot water lines.
  3. PEX piping is easily bent and flexible.

Once you have identified the PEX pipe, go ahead and follow our master plumber’s instructions below to repair your water lines.

What you’ll need:

  • a flashlight
  • safety goggles
  • a tape measure
  • a 1″ PVC pipe cutter
  • a PEX cinch clamp tool – PEX tubing in the correct size – replacement components (brass or plastic – brass is a bit more expensive, but last much longer)

Step 1: Shut off the mains

As always, before you embark on a plumbing adventure, be sure to shut off the mains, and release the water pressure in the line you’re working on by turning on the faucet.

Don’t know how to do that? Check out this tutorial.

Step 2: Remove the old tubing

Cut the PEX piping directly below the leaking fitting. Do this by holding the pipe cutter perpendicular (or at 90 degrees) to the pipe you’re trying to cut.

You will have to remove the other end of the tubing too, especially if it is screwed into the bottom of your faucet. Disconnect it by turning it in a counterclockwise direction.

Step 3: Measure & cut the new piping

Use the old section of piping as a guide to measure and cut the correct length of the new piping. A permanent marker works well in marking where you want to make the cut, and you can use a pipe cutter to cut it.

Step 4: Attach the fittings

Set out the parts in the order in which you will be assembling them, starting with the FPT swivel which you will be pressing into the end of the PEX tubing, ensuring that it fits tightly. There should be no gaps. The gap on the end of the cinch tool should be placed over the raised tab on the pinch clamp. Now place the pinch clamp 1/8″ below the end of your PEX tube and squeeze it multiple times with the cinch tool until the LED light is illuminated.

Slip the second clamp over the free end of your PEX tube and press the ball valve onto the free end of the tube.

Step 5: Position the new pipe

Slide a pinch clamp onto the old PEX tubing, then slide the free end of your ball valve fitting in place. Use the cinch clamp again to secure everything in place.

There you have it! You have just replaced a broken piece of PEX tubing!

Not so keen to take on this project? Give Ridgeway Mechanical a call. Our PEX piping experts will help you in no time.

Searches Related to Sewer Repair in Buckhead

Toilet Repair Atlanta

Faucet Installation Buckhead Atlanta, GA

Faucet Installation in Buckhead, Georgia Looking for Faucet Installation in Atlanta, GA? Ridgeway Plumbing provides fast plumbing repairs to the {city} area 24/7. Quality work, upfront pricing, and a 100% Satisfaction Guarantee is our code of honor. Local residents looking for Drain Cleaning Plumber In My Area or Basement Water Leak [...]

2019-06-17T04:23:59+00:00