Call The 24/7 Plumber at (470) 305-7006 | LIC # MP006430

No Dig, Trenchless Sewer Line Repair Dunwoody GA

Why You Should Get a New Water Heater ASAP

If you are a Dunwoody resident with sewer line problems you are at the right place. We are better known for Plumbing Atlanta but did you know that we have replaced more than ninety thousand sewer lines in the Atlanta metro area! Ridgeway Mechanical Inc. offer professional Sewer Line Repair in Dunwoody, GA.

Sewer Line problems are dismayed by landlords universally. A busted sewer line is not only upsetting but it can be dangerous to the health of the occupants of the property and thos who live nearby. A broke sewer line can be caused by build-up that clogs the pipes and other obstructions. Don’t matter of the type of sewer line you have it will cost you to fix it, but, if you have the trenchless sewer pipe system, the repair time will be faster and easy. If you were lucky enough to detect a trouble before the line breakes, you can save yourself a lot of money, trouble and embracement.

If you notice that your shower or sinks are draining very slowly you might be tempted to use a chemical like ‘drano’ to to fix the problem, but this can worsen the problem. In general slow drains an indicator of deeper plumbing issue. If you notice the water level in the toilet is higher than usual, this is cal also be an indicator of a failing sewer line. Unusual smells and odd sounds are yet another signal of pending sewer line trouble. If you detect an boost in pests around your house you may need your sewer line service. Call The 24/7 Plumbers of Ridgeway at (770)-354-4594 in Dunwoody. At Ridgeway Mechanical Inc. we provide Sewer Line Repair in Roswell, GA. and neighboring suburbs. Here are more articles that may be of interest to those looking for Sewer Line Repair in Norcross, GA.

Article Related to Trenchless Sewer Line Repair Dunwoody GA

Tips for Plugging Your Sewer Line

Plumbing Issues That Require Urgent Attention

Disasters, heavy rains or burst pipes can cause considerable damage to your property, especially if there is a back flowing sewer. At the best of times, a clogged sewer can pose health hazards, so the last thing you want is for it to flow back into your basement or home. Here at Ridgeway Mechanical, homeowners rely on us to plug their sewer lines in order to alleviate these risks. Plugging your sewer line can help save your property from flooding and sewage backup during disasters, such as floods. This precaution is highly recommended for people who live in flood-prone areas. Stopping the sewer is a tricky process, as there is no shut off valve. The sewage does not flow out of the home while it is plugged, so you should also shut of your main water supply in order to prevent faucets from running or toilets from being flushed for the time being.

Now, let’s take a look at how you can plug your sewer line:

  1. Purchase a Sewer Test Plug

As you’ve learned in boy scouts, you need to come prepared. In this case, you need to prepare ahead by buying an inflatable sewer line test plug. Ensure that the test plug matches the size of the main sewer pipe, which is usually 3-inches. Single-diameter plugs without bypass ports are cheaper. Also buy a hand-pump, if you don’t have one already. You will need this to inflate the plug. The single-diameter plugs use a bidcycle pump. Floor drains running from basements are often located after the main cleanout, and require a different sized plug. That means that you would need a 1.5-inch plug for the floor drain and a 4-inch plug for your main sewer. The same pump should suffice. You may be able to find a test plug at your local hardware store, but also check a plumbing store. If you can’t find it locally, look online.

  1. Locate the Main Cleanout

You will need to find the main cleanout that runs from your home to the municipal supply in order to efficiently plug the sewer. There should be no drains after the cleanout, but if there are, you will have to plug them individually.

  1. Inform the Household

Notify everyone in the home that you will be plugging the drain, and explain that they won’t be able to use water. Be sure to collect sufficient drinking and potable water, and make arrangements for toilet use.

  1. Turn Off the Main Supply

Ensure that the main supply is shut off in order to prevent running water down the drain you intend to plug.

  1. Remove the Cleanout Cap

The cleanout cap is located at the top of a y-shaped drain pipe. Use a pair of pliers or a large wrench to remove the cleanout cap.

  1. Attach Rope to the Plug Bracket

Tie a rope securely to the sewer plug bracket. This can be used later to retrieve the plug from the sewer pipe later, when the flooding backflow risk has subsided.

  1. Insert the Plug

Insert the uninflated plug into the sewer, past the connecting pipes and in the direction of the normal sewage flow.

  1. Inflate the Plug

Using your bicycle tire pump, inflate the plug. As the plug expands, the sewer will be plugged, stopping any back flow. This process should be repeated for all main drains. Need help? Ridgeway Mechanical offers a wide range of drain and sewer line services, and we can help you to plug your sewer lines to help avoid flooding of sewage, which can damage your property. Call us today!

This post was brought to you by: Trenchless Sewer Line Repair Dunwoody GA

Services Related to Trenchless Sewer Line Repair Dunwoody GA

Sewer Line Repair Dunwoody, GA.

Sewer Line Repair & Replacement in Dunwoody, GA. Looking for Sewer Line Repair & Replacement service in or near Dunwoody, Georgia? Call RidgewayPlumbingAtlanta.Com at (770)-354-4594! We offer fast, reliable, 24-hour service for all types of plumbing problems Neighbors in Dunwoody, GA understand that when you're looking for a top rated Sewer Line [...]

2018-01-26T21:45:04+00:00