Call The 24/7 Plumber at (470) 305-7006 | LIC # MP006430

No Dig, Trenchless Sewer Line Repair Monroe Georgia

Plumber Service Atlanta_

Are you a Monroe landlord with sewer line troubles you have arrive to the right website. We may be better known for Plumbing Contractor Atlanta but did you know that we have lay more than 90,000 sewer lines in the Atlanta metro area! Ridgeway Mechanical Inc. offer expert Sewer Line Repair in Monroe, GA.

Sewer problems are dismayed by landlords all over the place. A busted sewer is not only embarrassing but it can be hazardous to the health of the occupants of the home and thos who live nearby. A broke sewerpipe can be caused by trees that has grown through the pipes and other obstructions. Despite of the type of sewer pipe you have it will cost you to fix it, but, if you have the trenchless sewer pipe system, the patch up time will be quicker and easy. If you were lucky enough to notice a problem before the pipes burst, you can save yourself a lot of money, trouble and embracement.

When you notice that your tubs or bathroom sink are draining slowly you may consider using chemical like ‘drano’ to help it along, but this can worsen the problem. Slow drains is one indicator of bigger plumbing problem. If you notice the water level in the toilet bowl is changing, this is an indicator of a deteriorating sewer line. Odd smells and odd noises are another signal of pending sewer line trouble. If you detect an increase in rodents around your property you may need your sewer line looked at. Call The 24/7 Plumbers of Ridgeway at (770)-354-4594 in Monroe. At Ridgeway Mechanical Inc. we provide Sewer Line Repair in Snellville, GA. and neighboring suburbs. Here are other blog post that may be of interest to those looking for Sewer Line Repair in Lithia Springs, GA.

Blog Related to Trenchless Sewer Line Repair Monroe GA

Tips for Plugging Your Sewer Line

Plumbing Contractor Atlanta_

Disasters, heavy rains or burst pipes can cause considerable damage to your property, especially if there is a back flowing sewer. At the best of times, a clogged sewer can pose health hazards, so the last thing you want is for it to flow back into your basement or home. Here at Ridgeway Mechanical, homeowners rely on us to plug their sewer lines in order to alleviate these risks. Plugging your sewer line can help save your property from flooding and sewage backup during disasters, such as floods. This precaution is highly recommended for people who live in flood-prone areas. Stopping the sewer is a tricky process, as there is no shut off valve. The sewage does not flow out of the home while it is plugged, so you should also shut of your main water supply in order to prevent faucets from running or toilets from being flushed for the time being.

Now, let’s take a look at how you can plug your sewer line:

  1. Purchase a Sewer Test Plug

As you’ve learned in boy scouts, you need to come prepared. In this case, you need to prepare ahead by buying an inflatable sewer line test plug. Ensure that the test plug matches the size of the main sewer pipe, which is usually 3-inches. Single-diameter plugs without bypass ports are cheaper. Also buy a hand-pump, if you don’t have one already. You will need this to inflate the plug. The single-diameter plugs use a bidcycle pump. Floor drains running from basements are often located after the main cleanout, and require a different sized plug. That means that you would need a 1.5-inch plug for the floor drain and a 4-inch plug for your main sewer. The same pump should suffice. You may be able to find a test plug at your local hardware store, but also check a plumbing store. If you can’t find it locally, look online.

  1. Locate the Main Cleanout

You will need to find the main cleanout that runs from your home to the municipal supply in order to efficiently plug the sewer. There should be no drains after the cleanout, but if there are, you will have to plug them individually.

  1. Inform the Household

Notify everyone in the home that you will be plugging the drain, and explain that they won’t be able to use water. Be sure to collect sufficient drinking and potable water, and make arrangements for toilet use.

  1. Turn Off the Main Supply

Ensure that the main supply is shut off in order to prevent running water down the drain you intend to plug.

  1. Remove the Cleanout Cap

The cleanout cap is located at the top of a y-shaped drain pipe. Use a pair of pliers or a large wrench to remove the cleanout cap.

  1. Attach Rope to the Plug Bracket

Tie a rope securely to the sewer plug bracket. This can be used later to retrieve the plug from the sewer pipe later, when the flooding backflow risk has subsided.

  1. Insert the Plug

Insert the uninflated plug into the sewer, past the connecting pipes and in the direction of the normal sewage flow.

  1. Inflate the Plug

Using your bicycle tire pump, inflate the plug. As the plug expands, the sewer will be plugged, stopping any back flow. This process should be repeated for all main drains. Need help? Ridgeway Mechanical offers a wide range of drain and sewer line services, and we can help you to plug your sewer lines to help avoid flooding of sewage, which can damage your property. Call us today!

This article was brought to you by: Trenchless Sewer Line Repair Monroe Georgia

Services Related to Trenchless Sewer Line Repair Monroe GA

Sewer Line Repair Monroe, GA.

Sewer Line Repair & Replacement in Monroe, GA. In search of Sewer Line Repair service in or near Monroe, Georgia? Call RidgewayPlumbingAtlanta.Com at (770)-354-4594! We offer fast, reliable, 24-hour service for all types of plumbing problems People in Monroe, Georgia know that when you're looking for an affordable Sewer Line Repair & [...]

2018-01-27T01:49:00+00:00