Call The 24/7 Plumber at (470) 305-7006 | LIC # MP006430
Water Heater Dacula GA 2018-02-03T08:17:20+00:00

Water Heater Repair Dacula, GA

How To Choose a Water Heater

Emergency Water Heater Repair Services in Dacula, GA

Get Help!

Seeking fast water repair service in Dacula, Ga? At Ridgeway Mechanical we offer fast, reliable, 24-hour water heater installation service Call (470) 305-7006 for same day service!

Get Help!

Unlike other appliance and electronics, water heaters are known for breaking at the worst of times. If you are experiencing water heater problems call the Dacula water heater experts. At Ridgeway Mechanical we have been helping familes in Dacula, GA, with their water heater problems for over thirty-five years. Our emergency water heater service in Dacula, Ga., caters to those in need of a fast solution to their water heater trouble

How to Get Fast Water Heater Repair Service in Dacula, GA?

The first reaction for those dealing with a failed water heater is to go to your local Home Deport. However, it is sometimes difficult to find a knowledgeable individual at these places. At Ridgeway Plumbing we bring over 35 years of knowledge to the job and are considered one of the top water heater companies in Suwanee, GA.

It’s not fun when anything needs repairing at home, but a water heater sure could be a pain. You don’t want to tinker from it yourself much because you would like to be safe. You should also make sure that you don’t make any mistakes, as hot water heater main and repair can be very technical. And, you don’t wish to enjoy any longer time than you need to in terms of life without warm water.

You won’t take hot showers with no consideration for many years most likely. They have happened to we all. The hot water heater goes out, and you never know exactly what is wrong. 1 time at my mom’s house, it did actually simply be the pilot light. She had an older water heater back then. Therefore we got the pilot light lit up, and the next action you understand, it went out again.

And then we tried to light it yet another time, only the same thing happened. Understandably, at that time we figured there seemed to be another issue. Basically we were right, it was actually merely a small part that had been necessary. It is really interesting because you just never know when what’s wrong is really just likely to be a tiny fix. It does happen sometimes.

The moral in the story is not to automatically believe that something major is wrong with your hot water heater. Different styles of issues can arise, so just recognize that and wait for a repairman to present word. Maybe you, too, can have a nice surprise when you get your repair bill. It would be nice to return to business as always taking hot baths and showers without having to be worried about paying a lot of money. And hopefully it will likely be awhile just before the hot water heater requires your attention again. However, a surprise bill is not something you have to warry about when dealing with Ridgeway Mechanical. We’ll trouble shoot your situation and provide you with an accurate quote! If you are just doing research take a look at our blog.

Blog Post Related to Water Heater Service Dacula Georgia

How to Replace the Water Line on Your Ice-Maker

Tankless Water Heater Installation Atlanta_

Appliance companies tend to sell new ice-makers, washing machines, and other appliances with low-quality water lines and valves. You won’t believe how often we here at Ridgeway Mechanical receive calls from clients with flooded kitchens as the result of these inferior materials. What’s a person to do? You need a washing machine and you need an ice maker. We recommend that you replace the inferior plastic water lines with braided steel supply lines.

Replacing your ice-maker water line with a braided steel supply line and installing a quality copper tee fitting and high-quality shut-off takes only half an hour, and you probably won’t have to worry about leaks again. Braided steel is non-kinking and highly durable, especially when compared to 1/4-inch flexible copper or – worse – plastic.

You can either call Ridgeway Mechanical to do it for you, or you can do it for yourself, using the instructions below. We recommend that you only tackle this task if you’re an experienced DIY expert.

Here’s what you’ll need:

Materials

  • a braided steel water line
  • copper solder
  • copper flux
  • copper repair couplings
  • copper tee fitting
  • copper shutoff valve

Tools

  • a wrench set
  • a pipe cutter
  • a soldering torch

Be sure that you have everything handy before you start.

Replace Your Ice-Maker Supply Line in 5 Simple Steps

Step 1: Turn off the main water supply

Locate your home’s main water supply and turn it off. Now drain the system by opening all the faucets.

Step 2: Remove Saddle Valve

After removing the saddle valve, but the copper underneath it. Depending on how long the water line is, you may need to cut out more in order to create room for additional copper and a repair coupling.

Step 3: Prepare the Fittings & Shutoff Valve

The new shutoff will have a packing nut which you should unscrew. Also remove the core and the handle before you solder it. Jiggle the pipes to remove all the water.

Now clean the copper fittings, before fluxing and assembling them before soldering the joints.

Let the pipe cool for about 10 minutes before reattaching the shutoff handle again.

Step 4: Tighten Water Line to the Shut-Off

Insert the braided steel water line to the compression fitting on the shutoff. You can hand-tighten the water line, but give it a good half-turn with a wrench too.

You can now turn the main water supply back on. Take this opportunity to check for leaks. Allow water to run through the new braided pipe into a bucket for a couple of minutes to remove any solder bits or corrosion.

Step 5: Attach the Water Line to the Fridge

Secure the water line to the water inlet valve at the back of your refrigerator from which you removed the plastic pipe.

That’s it – you have just enhanced the durability of your ice maker by several years. Now you don’t have to worry about a flooded kitchen, and you can rest assured that your ice-maker will function as intended.

Our master plumber warns against using the wrong tools or materials to do this job. Appliances are costly, and the wrong materials can cause damage. We recommend that, unless you have the right materials and plumbing and DIY experience, you rather call Ridgeway Plumbing Atlanta to replace your ice-maker supply line.

Here is more information about Water Heater Repair Services in Dacula, GA.

Services Related to Water Heater Repair Dacula, Georgia

At Ridgeway Plumbing we provide a lot more than just water heater repairs in Dacula, GA. As a full-service plumbing company in Dacula, GA. We can take care of all your plumbing problems, including: