Call The 24/7 Plumber at (470) 305-7006 | LIC # MP006430
Water Heater Tucker GA 2018-02-13T08:16:36+00:00

Water Heater Repair Tucker, GA

Leak Detection Atlanta_

Emergency Water Heater Repair Services in Tucker, GA

Get Help!

In the need of emergency water repair and service in Tucker, Ga? At Ridgeway Plumbing we offer fast, reliable, 24-hour water heater repair service Call (470) 305-7006 for same day service!

Get Help!

A water heater can malfunction at any time without warning. If you are experiencing water heater failure call the Tucker water heater experts. At Ridgeway Plumbing we have been helping familes in Tucker, GA, with their water heater problems for over 35 years. Our emergency water heater service in Tucker, Ga., caters to those in need of an immediate solution to their water heater problem

How to Get Fast Water Heater Repair Service in Tucker, GA?

The natural reaction for anyone dealing with a dead water heater is to run your local Home Deport. However, It can be complex to find a competent sales person at these places. At Ridgeway Plumbing we bring more than 35 years of experience to the job and are considered the top water heater companies in Acworth, GA.

It’s not fun when anything needs repairing in the home, but a water heater sure could be a pain. You don’t desire to tinker by using it yourself much because you wish to be safe. You should also make certain you don’t make any mistakes, as water heater main and repair can be quite technical. And, you don’t wish to enjoy any further time than you will need to when it comes to life without boiling water.

You won’t take hot showers without any consideration for quite some time most likely. They have happened to everyone. The new hot water heater quickly scans the blogosphere, and who is familiar with precisely what is wrong. Once at my mom’s house, it appeared to basically be the pilot light. She had an older hot water heater during the time. And then we got the pilot light lit up, and the next action you understand, it went out again.

So we made an effort to light it an additional time, only the same happened. As you can imagine, at that point we figured there was another issue. Basically we were right, it was actually merely a small part that was necessary. It is definitely interesting since you just never know when what’s wrong really is just likely to be a tiny fix. It does happen sometimes.

The moral of your story will not be to automatically believe that something major is wrong along with your warm water heater. Various sorts of issues can arise, so just know that and wait for the repairman to present word. Maybe you, too, can have a pleasing surprise when you are getting your repair bill. It will be nice to return to business as usual taking hot baths and showers while not having to concern yourself with paying a lot of cash. And hopefully it will likely be awhile just before the hot water heater requires your attention again. However, when dealing with Ridgeway Plumbing you can be sure you are not getting any surprices.. We will trouble shoot your problem and give you an exact estimate! If you are just looking around visit our blog.

Blog Post Related to Water Heater Service Tucker GA

How to Replace the Water Line on Your Ice-Maker

Shower Repair Atlanta_

Appliance companies tend to sell new ice-makers, washing machines, and other appliances with low-quality water lines and valves. You won’t believe how often we here at Ridgeway Mechanical receive calls from clients with flooded kitchens as the result of these inferior materials. What’s a person to do? You need a washing machine and you need an ice maker. We recommend that you replace the inferior plastic water lines with braided steel supply lines.

Replacing your ice-maker water line with a braided steel supply line and installing a quality copper tee fitting and high-quality shut-off takes only half an hour, and you probably won’t have to worry about leaks again. Braided steel is non-kinking and highly durable, especially when compared to 1/4-inch flexible copper or – worse – plastic.

You can either call Ridgeway Mechanical to do it for you, or you can do it for yourself, using the instructions below. We recommend that you only tackle this task if you’re an experienced DIY expert.

Here’s what you’ll need:

Materials

  • a braided steel water line
  • copper solder
  • copper flux
  • copper repair couplings
  • copper tee fitting
  • copper shutoff valve

Tools

  • a wrench set
  • a pipe cutter
  • a soldering torch

Be sure that you have everything handy before you start.

Replace Your Ice-Maker Supply Line in 5 Simple Steps

Step 1: Turn off the main water supply

Locate your home’s main water supply and turn it off. Now drain the system by opening all the faucets.

Step 2: Remove Saddle Valve

After removing the saddle valve, but the copper underneath it. Depending on how long the water line is, you may need to cut out more in order to create room for additional copper and a repair coupling.

Step 3: Prepare the Fittings & Shutoff Valve

The new shutoff will have a packing nut which you should unscrew. Also remove the core and the handle before you solder it. Jiggle the pipes to remove all the water.

Now clean the copper fittings, before fluxing and assembling them before soldering the joints.

Let the pipe cool for about 10 minutes before reattaching the shutoff handle again.

Step 4: Tighten Water Line to the Shut-Off

Insert the braided steel water line to the compression fitting on the shutoff. You can hand-tighten the water line, but give it a good half-turn with a wrench too.

You can now turn the main water supply back on. Take this opportunity to check for leaks. Allow water to run through the new braided pipe into a bucket for a couple of minutes to remove any solder bits or corrosion.

Step 5: Attach the Water Line to the Fridge

Secure the water line to the water inlet valve at the back of your refrigerator from which you removed the plastic pipe.

That’s it – you have just enhanced the durability of your ice maker by several years. Now you don’t have to worry about a flooded kitchen, and you can rest assured that your ice-maker will function as intended.

Our master plumber warns against using the wrong tools or materials to do this job. Appliances are costly, and the wrong materials can cause damage. We recommend that, unless you have the right materials and plumbing and DIY experience, you rather call Ridgeway Plumbing Atlanta to replace your ice-maker supply line.

Here are more details about Water Heater Repair Services in Tucker, GA.

Services Related to Water Heater Repair Tucker, GA

At Ridgeway Plumbing Atlanta we provide a lot more than just water heater repairs in Tucker, GA. As a full-service plumbing company in Tucker, GA. We can help you with all your plumbing troubles, including: